Ozone removal efficiency of the KI-denuder in the carbonyl sampling

Abstract

In the carbonyl sampling of 2, 4- dinitrophenylhydrazine (DNPH) impregnated cartridge, the ozone removal was necessary because ozone reacted with the DNPH derivatives. A commercial ozone scrubber was usually used to remove O3. However, high humidity leaded to carbonyl compounds being trapped on the ozone scrubber before passing through the DNPH cartridge. The purpose of this study was to assess the ozone removal by KI-denuder under the climatic conditions of Ho Chi Minh City. Several parameters including air sampling flow rate and denuder length were optimized to achieve the highest removal efficiency. The optimum parameters of the KI denuder were the sampling flow rate of less than 1 L/min, and the denuder length of 20 cm. The effect of the initial O3 concentration on the removal efficiency was also investigated. Finally, the ozone removal efficiency of KI-denuder was compared to that of ozone scrubber when two devices were applied for the carbonyl sampling during field measurement. The results show that KI-denuder could be used to replace the ozone scrubber with high removal efficiency, particularly in high humidity condition. In conclusion, KI-denuder was effective, simple, easy to use and cheap. Therefore, it was encouraged to use in carbonyl sampling.