Open Access

Downloads

Download data is not yet available.

Abstract

Field-programmable gate array (FPGA) technology has been widely used in setting up triggering systems and DAQ systems for radiation detectors, because it has several advantages such as fast digital processing, compact, programmable and high stability. Since 2010, with we have developed FPGA-based trigger systems and FPGA-based DAQ systems used for radiation detectors. Triggering systems for cosmic ray measurements, readout electronic for environmental radiation monitor in air. We also developed nuclear electronic equipment such as spectrum analyzer MCA (Flash-ADC/FPGA based), the pulse generator, counters, readout electronic for multiple radiation sensors. In this paper, we present two experiments, on the cosmic-ray induced response on the NaI(Tl) detector and environmental radiation monitoring system. For those experiments, trigger system are built by FPGA-based technology.



Author's Affiliation
Article Details

Issue: Vol 1 No T4 (2017)
Page No.: 197-204
Published: Dec 31, 2017
Section: Original Research
DOI: https://doi.org/10.32508/stdjns.v1iT4.481

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Vo, H., Nguyen, H., & Tran, T. (2017). Development of triggering and DAQ systems for radiation detectors using FPGA technology. Science & Technology Development Journal: Natural Sciences, 1(T4), 197-204. https://doi.org/https://doi.org/10.32508/stdjns.v1iT4.481

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 309 times
Download PDF   = 267 times
Total   = 267 times

Most read articles by the same author(s)